Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%
Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.
- ELEMNT BOLT GPS Bike Computer - TICKR Heart Rate Monitor - RPM Speed and Cadence Sensors Advantage by design Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and pair seamlessly with the ELEMNT BOLT, so that you can get live and accurate performance metrics. The Wahoo ELEMNT Bike Computers are the most integrated GPS bike computers on the market with a full list of compatible hardware and smartphone apps. Includes Mounts for ELEMNT BOLT Bike Computer and RPM Sensors ELEMNT BOLT Two sturdy and secure mount options - an integrated out-front mount and stem mount. RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.
ELEMNT RIVAL Multisport Watch keeps the focus locked on your performance, not your equipment. Using the intuitive ELEMNT operating system, RIVAL delivers a simple user experience. Unique multisport features like Touchless Transition, Multisport Handover and Perfect View Zoom create a seamless performance advantage whether training or competing. Designed with a 64 color screen, ceramic bezel and gorilla glass lens, ELEMNT RIVAL not only looks great for everyday use but will also withstand your hardest workouts. SIMPLE TO USE CUSTOM WORKOUT SCREENS The intuitive ELEMNT Companion App guides you through set-up, customizing settings, configuring workout pages, and linking ELEMNT RIVAL to your training apps and sensors. SIMPLE TO SEE PERFECT VIEW ZOOM: Zoom in and out of workout screen to focus on the metrics that matter SIMPLE TO TRACK TOUCHLESS TRANSITION ELEMNT RIVAL is the smartest multisport watch for triathletes, as it automatically tracks your performance across swim, bike, and run without needing to interact with the watch during transitions Specs - Physical Dimensions: 10in Lx2in Wx0.65in D (25.4cm L x 5.08cm W x 1.65cm D ) - Display Size: 1.2" (30.4mm) - Weight: 53g - Battery: Rechargeable via RIVAL USB Charger - Battery Life: Smartwatch Mode of 14 days, GPS/HR Mode up to 24 Hours - Waterproof: 5ATM or 50m - Supported Satellites: GPS and BEIDOU Galileo In the Box -ELEMNT RIVAL Multisport GPS Watch -USB charging cable -Quick Start Guide (QSG) -Important Product Information guide (IPI)
- ELEMNT ROAM GPS Bike Computer - TICKR Heart Rate Monitor - RPM Speed and Cadence Sensors Built for the ride Get everything you’d need for the freedom to roam on your next ride! The ELEMNT ROAM GPS bike computer features powerful, on-device navigation options including turn-by-turn directions. It’s the first Wahoo bike computer to include a color screen, and when combined with the crystal-clear 2.7" Gorilla Glass© display and an ambient light sensor, it makes seeing your routes and data easier, so you can go back to focusing on your ride. It's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and pair seamlessly with the ELEMNT ROAM, so that you can get live and accurate performance metrics. The Wahoo ELEMNT Bike Computers are the most integrated GPS bike computers on the market with a full list of compatible hardware and smartphone apps. Includes Mounts For ELEMNT ROAM Bike Computer and RPM Sensors ELEMNT ROAM comes with an integrated out front mount. RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.
The Wahoo ELEMNT ROAM GPS bike computer is built for the ride. Its smart navigation features allow for on-device navigation including “Back on Track” re-routing which will get you to your destination even if you veer off course. The ELEMNT ROAM is the first Wahoo bike computer to include a color screen. When combined with the crystal-clear 2.7" Gorilla Glass display, it makes seeing your routes and data easier, so you can go back to focusing on your ride. The ELEMNT ROAM also includes an ambient light sensor, so the screen backlight and LED lights will automatically adjust based on lighting conditions both indoors and outdoors. With a longer battery life, you can explore for up to 17 hours before you need to recharge. The ELEMNT ROAM GPS bike computer makes it simple to explore—whether you need turn-by-turn directions or just want to find the fastest way home. Its on-device navigation features and powerful integrations are designed to help you roam with confidence. Lastly, the Roam is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. The Roam Bundle comes with the Roam GPS computer, TICKR heart rate chest strap, RPM Speed & Cadence sensors. - Unique to Wahoo, the integrated out-front mount creates a cohesive system of the ELEMNT ROAM unit and mount for a sleek look and smooth riding. - The thin, lightweight, and damage-resistant Gorilla Glass helps ELEMNT ROAM can stand up to the toughest conditions. - Automatically adjusts screen brightness and LED lights as lighting conditions change both indoors and outdoors. - Vibrant, crystal clear color 2.7" (68.6mm) display makes seeing your data and routes easier than ever. - A truly wireless bike computer with no plugin required (except to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world.
SERIOUS AND PRECISE POWER- Enhanced by automatic calibration, the KICKR stands up the demands of the world's most powerful cyclists by delivering 2,200 watts of resistance that's accurate to within +/- 1%. REALISTIC RIDE FEEL- KICKR’s professional-grade high-inertia 16lb flywheel and AXIS feet combine to provide an ultra realistic ride feel. SMART RESIST- Set your resistance or power threshold through your favorite app for the most efficient workout possible. THE MOST POWERFUL AND REALISTIC INDOOR TRAINER EXPERIENCE. Power and accuracy designed to offer the world’s most demanding cyclists the ultimate indoor riding experience. KICKR AXIS Feet  PROFESSIONAL-GRADE CONSTRUCTION - KICKR’s robust steel construction and a wide stance provide the durability and stability needed to endure years of high-intensity training.
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
The Vittoria Road Tubeless Tool-Kit will make the installation and removal of your tubeless tires easy and quick. Each kit contains one pair of pliers and clips per package. The patented plier design provides a gentle yet secure grip on the tire, which is needed when removing the tire bead from the rim. This creates space for the included clips to be inserted between the tire and rim. Additionally, the handles of the pliers are designed to be used as tire levers, during mounting and dismounting, and are designed to prevent damage to the rim and tire. The Vittoria Road Tubeless Tool-Kit is necessary for the Air-Liner Road removal from your wheel.
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
The VIAIR TLC Inflator can be used for airing up bike and vehicle tires (Schrader valve attachment not included), as well as adding compressed air to any inflatable item with a Presta valve stem. It comes with a rotating, fully serviceable Presta Head attachment, a pre-installed Quick-Connect Stud for air hose connection and a normally closed Quick-Connect Coupler for connecting inflation attachments. FEATURES: – 2", 0-120 PSI Mechanical Air Pressure Gauge – Bleeder Valve for Pressure Adjustment – Deluxe Carry Bag Included
The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:
The NORDIC 4 is a slim and fast run/ski hydration pack for developed for racing and small adventures when XC-skiing, Running or Mountain biking. The pack deliverers 4 liters of storage, including a 2.0L hydration bladder and our revolutionary Thermo Cell insulation technology that eliminates freezing of the drink tube and bite valve even in the most extreme weather conditions. - Zero bounce with No Dancing Monkey 1.1 + Thermocell-our patented 4-point suspension tech for an absolute secure and tight fit. - NDM Buckle-Technical buckle for a more secure closure and a better fit - Thermocell-technology to keep your hydration from freezing in cold weather. - Lightweight-4L of total storage for slim and lightweight hydration backpack - 2.0L / 70 oz Hydration bladder included The perfect all-round pack for your hydration needs during your winter adventures. This pack comes ready for racing in extreme cold weather with the No Dancing Monkey 1.1 + Thermocell giving you zero bounce and a perfect fit while cross-country skiing or trail Running. We picked an Elite Hydration bladder with Plug-n-Play coupling and a Hydraflex Drink Tube to go in the pack making it easy to handle and simple to clean and dry. The Nordic is using the revolutionary Thermo Cell insulation technology that eliminates freezing of the drink tube and bite valve even in the most extreme weather conditions. The pack deliverers 4 liters of storage, enough to go lightweight while carrying the essentials on your winter or alpine adventure.
SHRED is the high-end performance daypack with an outstanding comfort fit that you bring to your favorite freeride MTB adventures. The pack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me harness system and waist support belt that makes it a super smooth biking backpack that will stay put without cramping your style, even when going downhill or on crazy terrain. - Zero bounce with No Dancing Monkey 2.0 + Snug Me-Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - 25L storage to fit all your gear and tools. - NDM Buckle-Technical buckle for a more secure closure and a better fit ZERO BOUNCE ON THE FREERIDE MOUNTAINBIKE TRAILS With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the No Dancing Monkey™ 2.0 + Snug Me harness you’re going to get the best fitting bike backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system and armor attachment points, makes this MTB backpack perfect for your trail or enduro MTB adventure. PACK YOUR GEAR The SHRED 25 has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles. We even threw in a microfiber cleaner tissue… we thought of everything! Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps. You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style, important on a mountain bike backpack.
FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.
HAJKER is a great waterproof adventure daypack, with a roll top opening and plenty of smart storage solutions. The pack is made for highspeed activities and is equipped with our bounce free No Dancing Monkey 2.1 harness system and waist support belt that makes the pack stay put on your back without cramping your style. - Zero bounce with No Dancing Monkey 2.0 + Snug Me – Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit. - 2-in-1-The waist belt can be used on its own, perfect as a lightweight hip-pack for short rides - Waterproof – Roll top opening to keep your gear safe from all kinds of weather. - 30L of total storage – fit everything you need for a full day of adventure WATERPROOF HIKING DAYPACK FOR THE BIG ADVENTURES The Hajker is the optimal hiking day pack with a big 30L main compartment with a roll top and an inner dry sack, waterproofing your gear for all kinds of weather. Store the stuff you need quick access to in the two zippered side pockets and compress it all together from the outside to get slimmer profile and a stable backpack that doesn’t bounce when you are out exploring, climbing, or running in the roughest terrain. The waist belt secures the lower part of the backpack and can also be detached and used on its own, like a hip-pack. You also got a helmet carry system that detachable and stored in a pocket when not in use. The pack also comes with an insulated water bladder pouch if you ever want to add a hydration bladder with the pack (bladder not included).
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
Ursus JUMBO KICKSTAND (300mm length): Finally, a no-hassle kickstand that does the job of holding up your bicycle! The Ursus Jumbo 80 Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 100kg. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. If you ride with a children's seat on your bicycle, URSUS Jumbo Kickstand is a must-have item to keep your bicycle from tipping over when you stop at the park or the ice cream parlor with your child. 300mm length.  Weighs 1180 grams. Made in Italy. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
Designed for touring and commuting or just about anytime you need added visibility; the UltraLite Bike Mirror offers versatility; light weight; and durability. At less than 2 ounces, it provides an amazingly wide field of view. Can be mounted almost anywhere you need it on your bike—handlebars of all types as well as forks and challenging applications like recumbents.
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency
Tri-Flow Synthetic Grease is specially formulated to lubricate any surface that slides, glides, rolls, twists, turns or spins. - Non-melting, waterproof formula designed to seal out water and contaminates and prevent rust and corrosion under extreme temperatures - Fully compatible with most rubbers and plastics