Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

SKS Beavertail Fender Set
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
SKS S-Blade
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
SKS X-Blade 27.5+/29-inch
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
SKS B42 Commuter II
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SKS B65 Commuter II (Bluemel) Fender Set For 28-inch
- SKS B65 Commuter II Fender Set for 28 - Famous Bluemel Full-Coverage Fender Set - Features stainless hardware and stainless 3.0mm stays - Front profile 680mm - Rear profile 1185mm - ASR security release system for the front wheel
Problem Solvers Fender Flute
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
Bontrager Enduro Front Fender
An easy-to-install fender for blocking tire spray and protecting fork stanchions in sloppy conditions. So fast and so clean The Bontrager Enduro Front Fender keeps menacing tire spray away while also protecting your fork stanchions from trail splatter. This durable, flexible poly fender has you and your bike covered when the trail gets sloppy. Installation is quick and easy, and the reversible design offers graphic options for bonus styles, free of charge. Product details - Quick and easy attachment installs to most forks in seconds - Easy installation with four attachment locations (attachment zip ties not included) - Multiple mounting eyelets for easy adjustment and compatibility for most forks and tire widths - Flexible 1mm poly material is durable and can be easily cleaned - Reversible design offers two graphic options - Recyclable polypropylene material
Bontrager NCS Fender Set
Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations
Planet Bike Big Buck Fender
Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires
Planet Bike Hardcore Fenders (Road)
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Topeak DeFender RX
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
SKS Edge AL Aluminum Fender Set
- Color: Black - Maximum Tire Width: 35 mm - Fender Width: 45 mm - Wheel Size: 700c - Material: Aluminum - Requires Eyelets?: Yes
Topeak DeFender M2
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
SKS P35 Chromoplastic Longboard
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 20-28
Portland Design Works Dave's Mud Shovel Front Fender
The Dave's Mud Shovel fender by Portland Design Works is designed specifically for fat bikes. It's extra-long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure, keeping your backside dry. • 6.5-inches wide • 19.5-inches long
Topeak D-Flash S Fender
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
RockShox RockShox MTB Fender
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
SKS S-Guard
The S-Guard is a lightweight, injection molded seat mounted fender for mountain or road use. Fast to fit, the S-Guard can also be zip-tied onto the saddle rails for extra security (zip tie is not included). Made of super soft material it fits nearly every saddle. - Mounts to saddle rails via cutouts that can be supplemented with zip ties - Appropriate for both mountain and road use - Made in Germany - 24g
SKS B53 For 20-inch Commuter II (Bluemel) Fender Set, For Recumbent / Folding Bike
- SKS B53 for 20" Commuter II (Bluemel) Fender Set for Recumbent / Folding Bike. - Features stainless hardware and stainless 3.0mm stays. - Made in Germany.
SKS Raceblade Long
This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays
Planet Bike Cascadia ALX 20-inch Recumbent Bike Fender
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)
Portland Design Works Poncho Fenders
Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty
SKS X-Tra Dry
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
MSW Splash Pad Front Fender
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
MSW Splash Pad Rear Fender
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
Planet Bike SpeedEZ Fenders (Road)
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
Planet Bike SpeedEZ Fenders (Hybrid/Touring)
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
WTB Mud Guard
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
Portland Design Works Sodapop Clip-On Fenders
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
Topeak D-Flash DT Fender
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
Page 1 of 4 Next page