Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.
$17.99 - $18.00
The Dave's Mud Shovel fender by Portland Design Works is designed specifically for fat bikes. It's extra-long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure, keeping your backside dry. • 6.5-inches wide • 19.5-inches long
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10"x24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370 mm (14.5") - Weight: 60 g (2.1 oz)
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445 mm (7.5") - Weight: 160 g (5.6 oz)
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$23.99 - $24.00
The Dave's Mud Shovel fender by Portland Design Works is designed specifically for fat bikes. It's extra-long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure, keeping your backside dry. • 5.5-inches wide • 22.5-inches long
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
$14.99 - $19.99
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
The S-Guard is a lightweight, injection molded seat mounted fender for mountain or road use. Fast to fit, the S-Guard can also be zip-tied onto the saddle rails for extra security (zip tie is not included). Made of super soft material it fits nearly every saddle. - Mounts to saddle rails via cutouts that can be supplemented with zip ties - Appropriate for both mountain and road use - Made in Germany - 24g
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
This super lightweight (45g) and discreet mudguard protects your face from mud and water. Made of super soft material it fits to 26", 27.5" and 29" bikes and is compatible with most forks. The Flapguard Mudguard sticks close to your bike even in extremely aggressive riding due to the supplied zip ties, which wrap around the fork bridge and fork legs. Mud is also kept off your fork seals. Also compatible on rear side of frame.
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
Keep water and mud at bay with SKS's Dashboard fender! It's light and easy to install and remove. Plus, it works with most rigid and suspension forks.
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.
- SKS B53 for 20" Commuter II (Bluemel) Fender Set for Recumbent / Folding Bike. - Features stainless hardware and stainless 3.0mm stays. - Made in Germany.
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
This innovative fender provides optimal protection for tapered suspension forks. The Shockboard Vario is easily mounted on the fork crown in seconds with the use of high quality rubber straps. The angle of the rear part of the Shockboard Vario fender can be adapted to the geometry of your wheel. The form is based on the SKS Shockboard and Shockblade and makes full use of the splash guard effect that has been proven for decades. - Mounts to fork crown via high quality rubber straps - The rear portion of the fender can be adjusted to various wheel sizes - Provides a solution for mounting a fender to tapered steerer suspension forks
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible