Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB Sonic Nut Inflation Holder
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB X-Nut Inflation Holder
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
XLAB Starter Kit
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Vittoria Pit Stop Tire Sealant
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak Presta Valve Extender XL
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Pressure-Rite
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
No Image
The Roadie TT Twin Turbo is a full-metal, pocket-sized mini pump that transfers larger air volume from a bigger diameter outer chamber into a smaller diameter inner chamber to deliver more air at higher pressures to fill tires 50% faster and easier. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel / Thumb Lock / Handle: Aluminum - Capacity: 160psi / 11 bar - Volume Per Stroke: 41.4cc - Side mount bracket - Size: 19.5 x 3.3 x 2.35cm / 7.7" x 1.3" x 0.9" - Weight: 100g / 3.53oz
No Image
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak Airbooster G2 CO2 Inflator
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Tri-BackUp Elite
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Topeak Tri-BackUp Elite 90
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
Topeak Shuttle Gauge Digital
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function
Silca Thread-on Schrader Chuck
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
Silca EOLO III CO2 Regulator ONLY
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, "Before EOLO, you had to turn the cartridge and pray!" Giving the user the ability to regulate the flow of gas into the tire was the key to the widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with a light-action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. - 6063 series aluminum body with Red-White-Green Insulators - Lightest spring action of any spring-valve regulator - Hardened tool steel puncture pin - 'Camera-lens' style valve head allows for easy installation even in disc wheels
Silca Tattico Mini-Pump
Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap
Silca Pista Plus Floor Pump
Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve
Silca SuperPista Digital Floor Pump
With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi
SKS EVA Pump Head Grommets
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
SKS Pump Adapter with Chain
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
SKS Airbuster CO2 Inflator
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS Supershort Mini Pump
Super small and super light, SKS's Supershort Mini Pump is great for the minimalist rider. The head works with both Schrader and Presta valves, and the handle folds into a T for easy pumping.
SKS Air X-Press 8.0
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
SKS Digital Airchecker
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS Airflex Explorer Mini Pump
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
SKS Airflex Racer Mini Pump
Airflex Racer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the Presta valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for high-pressure tires. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 8 bar/115 psi - Compatible with Presta and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 196mm - Weight: 105 grams - Made in Germany
SKS AirKompressor 12.0 Floor Pump
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
SKS RideAir
The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader, or Dunlop valves - Integrated canister pressure gauge
SKS Rennkompressor Floor Pump
SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.
SKS Airstep
The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany
Page 1 of 4 Next page