- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

Material: premium chrome vanadium steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.

Unior Fork Seal Driver

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

These taps are designed to work with our 1697 BSA BB tap set or our 1698 Italian BB tap set. If you have one or the other and need compatibility with the other type of thread, simply buy these taps and the corresponding tap holders and you'll be on your way.

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

Two in one! Or six in three! We have three configurations of our double-sided spoke wrench to pick from. Similar in form to a traditional combination wrench, these spoke wrenches are great for the less common sizes you might run in to and allow you to be prepared while taking a minimum of space in your toolbox or work bench.

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- Quickly and accurately determine the wear and stretch of any chain

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing. This precision made tool enables work without damage.

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

Used for holding brake and derailleur steel cables and pulling them out of the housing The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles together.

For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" Enables fast and precise determination of steering tube length desired after the cut

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Three most popular TORX sizes: T10, T15 and T25mm

The tool features an 8mm hex in the middle of it for those really stuck caps

Unior, Bracket Socket T47, Bottom Bracket Tool, T47, PF30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles