Filter By:

  • Show More Brands

  • Show Fewer Brands

Headsets

Trek Madone Factory Overstock Top Half Headset
$32.00 $79.99 60% Off
- Upper Headset Assembly for 2010+ Madone - Bearing, Compression Ring, 15mm Top Cap - Go green and save green — Zero packaging means zero waste and zero extra cost
Salsa ABB Top Cap
$10.99
Every threadless headset needs one, so make a stylish statement with Salsa's ABB Top Cap. The anodized cap fits standard 1 1/8-inch headsets and each design is laser-etched.
Ritchey Logic 1-1/8-inch Threaded Headset
$15.95
The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing
Ritchey Logic 1-inch Threaded Headset
$14.85
The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing
Ritchey Road Comp Drop In Integrated Headset Straight 1-1/8-inch Steerer
$24.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g
Ritchey WCS Drop In Integrated Lower Headset Assembly
$24.95 - $39.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g
Ritchey WCS Drop In Integrated Upper Headset Assembly: 1-1/8-inch
$29.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g
Ritchey WCS Logic Headset: 1-inch
$69.95
The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design promises minimal penetration from the elements. - Stack Height: 28.3mm - Material: Alloy - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Sealed cartridge (ACB) - Ti coated
Profile Design Carbon Headset Spacers (1-1/8-inch)
$24.99
Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.
Profile Design Threadless Size Converter
$15.99
Converts quill style forks to use threadless stems.
Origin8 Pro Pulsion Carbon Expander
$16.99
Origin-8's Pro Pulsion Carbon Expander is an expander and top cap for forks with carbon steerers. Instead of a traditional star nut (which will damage carbon), the Expander snugs tightly and safely in place in the fork for easy and accurate headset adjustments. Plus, it actually strengthens the fork. It fits most 1 1/8-inch forks, and includes a top cap with a stainless-steel bolt.
Odyssey Pro Headset
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey Pro Headset (Conical)
$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
FSA Orbit C-40 ACB
$46.99
- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit C-CX
$55.99
FSA's core line of headsets with built-in cable hanger for cyclocross applications. - Bearing Type: Cartridge - Weight: 93g - Crown Race: 30 - S.H.I.S Lower: IS42 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit CF-40
$82.99
- Carbon fiber top cover - Upper: Campagnolo angular contact bearings (black seal) - 1-1/8-inch, 45 degrees/ 45 degrees ACB upper - 1.5-inch, 36 degrees/ 45 degrees ACB lower - For tapered 46mm/56mm OD headtube - For 1-1/8-inch to 1.5-inch tapered fork
FSA Orbit DL
$25.99
- Weight: 160g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit Equipe
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit IS
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit MX
$69.99
FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - 7075 alloy crown race - Laser etched aluminum top cap - EC34/28.6 (36x36) | EC34/30 (36x36)
FSA Orbit UF
$34.99
The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay. - Forged and CNC machined 6061/T6 Aluminum cups - Patented alignment tip for increased durability and performance - Upper cup uses double sealed 5/32" ball bearings - Lower cup uses a black seal angular contact bearing - Laser etched aluminum top cap - Weight: 99g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Orbit X
$69.99
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings. - Classic shape with modern styling for high-end road bikes - For threadless steerers - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - Laser etched aluminum top cap - Weight: 82g
FSA Orbit XL-II
$59.99
The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - Laser etched aluminum top cap
FSA Orbit Xtreme Pro
$110.99
The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups
FSA Orbit Z
$41.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap
FSA Orbit Z 1.5R ZS
$79.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g
FSA Orbit ZS
$59.99
- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Chris King InSet 1
$149.00 - $179.99
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precision machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 1 is compatible with non-tapered 1-1/8-inch forks and frames using a 44mm headtube.
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Page 1 of 2 Next page