Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum
- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black
Upgrade or refresh your bike. - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual
Upgrade or refresh your bike. - Original equipment replacement Trek Duroc 40 27.5 Boost wheels - 15x110mm front, 148x12mm rear, 6-bolt disc, and SRAM XD freehub - Extra wide alloy rim (40mm outer, 36mm inner width) is perfect for Plus tires - 550g rim is double wall, welded, and disc-specific
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
- Prestacycle's patented "+" profile provides five-way airflow at the base. A flattened tire or tube cannot block flow of either sealant or air. - The valve has a full diameter air passage down the length of the shaft leading to 5-way distribution that expands flow without any reduction. Maximum air flow insures the easiest possible bead seating of a new tire. Maximum sealant flow insures best distribution within the tire. - When installing the valve, you have more choices for tools you can use to keep the base from rotating. Base has a 4mm Hex slot, and the "plus" feature allows you to use a Slotted or Cross-head (Phillips) screwdrivers. - Presta+ Valves are precision machined from a single block of forged 6061-T6 aluminum alloy. This increases the strength of our valves over others while maintaining an extremely light weight. The forged alloy allows our machining to cut highly accurate and smooth threads that make the vale easier to use. - Dual Seals reduce the chance for leaks around the valves. Our Nut includes both a surface sealing rubber base, and a rubber o-ring inside the threads. Maximum leak protection. - Includes (2) Presta+ valves plus a Prestadapter combination Schrader to Presta adapter plus valve core remover! Specifications: - Patented "+" pattern for distributed flow - Forged alloy single piece precision machined body - 50mm length - Semi-soft Presta cap protects presta valve from contaminants without the usual cap failure - Only 5 grams actual weight per valve including threaded nut and plastic cap
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
Replacement axles for DT Swiss hubs.
At the core of this all-around wheelset lies a modern, wide, and light aluminium rim. Being the foundation of the wheel, it makes for a balanced width-to-stiffness-to-weight ratio. This rim is complemented by a hub featuring DT Swiss' proven pawl system freewheel as well as a high end build with bladed spokes and elaborate alloy nipples. These features make it a premium training wheel easily able to race your mates when the city limit sign comes up.
When heavy duty cyclocross riding is your passion, the C 1800 is the right partner for any mission. With its high-end sleeved rim ready to take up MTB-sized rubber and the tough build featuring DT's sturdiest bladed spokes, it is right at home in anything from jumping obstacles to cutting through the mud to sprinting up steeps. Trademark DT Swiss reliability coming from the precision hubs and the superb wheel building quality guarantee trouble free rides year-in and year-out.
Comfort and speed combined. The PR 1600 SPLINE 23 work perfectly with the new breed of wider road tires. These bring about more comfort in the saddle and more grip even when the tarmac turns less and less smooth. The result is a faster, more relaxed ride. Together with the laterally stiff build which uses high end bladed spokes, the PR 1600 SPLINE 23 lets you tackle even the last climb of the day with enough energy to enjoy the looks of the hubs and to plan your next big ride.
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know how and passion, it is light and reliable but loves to smash into the rough like no other.
Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub with Ratchet EXP completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub with Ratchet EXP driver - Competition race spokes and Squorx nipples
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT Swiss athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
If going flat out fast is what you want, then this wheelset has all the details covered. DT's top triathletes choose the ARC 1100 DICUT 80 when it's race day. It's developed in partnership with aerodynamics specialists SWISS SIDE and equipped with SINC ceramic bearings to get up to speed and stay there. Supporting the complete system of the rider and bike with minimal drag and unparalleled handling under all conditions, riding fast is guaranteed. Finally the precision wheel build with high and even spoke tension gives you the reliability to dominate all of the 180 km.
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
Bontrager Tubeless (TLR) Rim Tape creates an air-tight seal that covers spoke holes in the rim for easy tubeless tire setup and installation. The tape securely bonds to the rim and doesn't leave residue when removed. For use with wheels approved for TLR Tape-based tubeless conversion. - Provides durable, air-tight seal over spoke holes for tubeless conversion - Wrap four wheels with a single layer of tape or two wheels with a double layer - Provides secure adhesion to rim without leaving residue when removed - Thoroughly clean and dry rim bed before applying - For use with rims approved for TLR Tape-based tubeless conversion
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation
These original replacements will get your wheels working like new. - Alloy thru-axle that can be used with a 6mm hex wrench or with a lever - Keep it light by removing the lever and instead use a 6mm hex wrench - Keep it convenient by keeping the lever inside the axle - Lever is held securely by internal O-ring - Lever sold separately
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Entry-level hubs
Upgrade or refresh your bike. - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with select Aeolus Pro, Aura, Race Lite, and Paradigm Comp wheels - End cap sold separately
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Rapid Drive 108 hubs - Pawls and springs sold separately - Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth
Upgrade or refresh your DT Swiss-based Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub bodies for DT Swiss Ratchet System hub platform - Compatible with all Bontrager MTB wheels with DT 240 hub internals - Available with either 5mm quick release or 12mm Thru Axle end cap
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement parts for Bontrager hubs using the DT 240 platform - Compatible with all Bontrager wheels with DT 240 hub internals - For use with Shimano MICRO SPLINE cassettes - Includes 12mm thru-axle end cap
Upgrade or refresh your bike. When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Kovee TLR 32H Hole wheel - Convert to tubeless with TLR rim strip and valve, sold separately - Durable alloy symmetric rim with 22.5mm internal 27mm external width - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Affinity TLR Disc 24H wheels - Centerlock hubs in 100x12m and 142x12mm sizes - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheel shipped as photographed
Light, smooth, and durable Paradigm is perfect for the cyclist looking for reliable, durable performance at a great value and is packed with many of the features of our higher end wheels. Paradigm features a tubeless ready (TLR) design for easy tubeless conversion and stacked lacing which provides a better bracing angle for a stiffer wheel and more responsive ride feel. Choose Paradigm TLR road wheels for lasting durability and performance that won't break the bank. Product details - Tubeless ready (TLR) rims allow for quick transition to tubeless system upgrade - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 23mm outer, 19.5mm inner width, 3-pawl hub compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Kovee TLR 28H Hole wheels - Convert to tubeless with TLR rim strip and valve, sold separately - Durable alloy symmetric rim with 22.5mm internal 27mm external width - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
A durable road wheel with a 25mm inner width perfect for higher-volume road and gravel tires. A wider rim for a better ride The Paradigm Comp 25 road wheel adds traction, speed, confidence, and comfort to your ride, with a wider internal rim width that lets you run lower pressure for better tire support. Product details - 25mm inner rim width (30mm outer) offers added tire support to better suit larger-volume road and gravel tires - Rapid Drive 54 road hubs provide quick engagement for faster acceleration and increased control - Offset spoke bed reduces wheel dish for stiff and stable performance - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 23mm rim depth with 24 hole front/rear and DT Aerolite spokes - Centerlock disc with 12mm thru-axle and end caps available for 15mm conversion - Includes TLR rim strip and TLR valve for simple tubeless setup - No rider weight limit
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Line 30 Centerlock Wheel - Bontrager Line 30 TLR alloy rim - Shimano MT-400 front and MT-510 Micro Spline rear hubs - Centerlock disc brake - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 30 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels feature OCLV Carbon rims with a 29mm inner width and will shave weight and add stiffness to your ride. - OCLV carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool - No rider weight limit
A carbon road wheel with a 37mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 37 is the perfect wheel for climbs, crits, cross, and more. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles—and the silky smooth hubs rolling on DT Swiss 350 internals deliver a quick-rolling ride wherever you roam. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy. Product details - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - All-new 37mm depth brings the benefits of aerodynamics to lightweight design - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 37mm depth OCLV Carbon rim (28mm outer, 21mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Center lock disc hubs with 12mm thru-axle front and rear, DT Swiss 350 hubs with 18 point engagement - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately - Includes TLR rim strip, TLR valve, and traditional rim strip - Warrantied for life, no rider weight limit
Bontrager's marquee lightweight carbon road wheel in a 51mm depth, designed for the ultimate in speed, stability, and confidence in all conditions. Be the fastest you The ultralight Aeolus RSL 51 is the perfect upgrade for a faster you. Created with Bontrager's all-new three-dimensional modeling design process, the all-new Aeolus RSL delivers a step-change in speed without sacrificing stability. It's built with the lightest RSL-level OCLV Carbon, shaped into a new 51mm rim profile for the ultimate in speed and versatility across all conditions. Tubeless Ready rims with a wider 23mm inner width are proven to roll with less drag, adding to the overall speed gains, while ultralight hubs with DT Swiss 240s internals and a Ratchet EXP 36-point freehub keep your ride smooth. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - RSL OCLV Carbon is lighter and stronger, allowing for faster, more stable rim profiles - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims compatible with both Bontrager TLR rim strips and TLR tape - 51mm depth OCLV Carbon rim (30mm outer) DT Aerolite spokes 24/24, DT ProLock nipples - Ultralight DT Swiss 240s internals with Ratchet EXP 36-point engagement 11sp freehub, 12s freehubs sold separately - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip
Page 1 of 1