Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp Tangente Tube Wrench
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Zipp Freehub Kit SRAM XDR for SS 176/177
Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
Wolf Tooth FOX Boost Front Thru Axle
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle
Wolf Tooth RockShox Boost Front Thru Axle
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum Not compatible with RS-1 fork
Wheels Manufacturing Inc. Outer Axle Nut
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Trek Bolt-On Skewers
- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black
Stan's No Tubes Rim Tape
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's No Tubes Alloy Tubeless Valve Stems
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Sta-Tru 20-inch Front Wheel
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 20-inch Rear Wheel
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 20-inch ST1 Wide Alloy Rear
- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples
Sta-Tru 26-inch Double Wall Front Wheel
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 700c Double Wall Rear Wheel
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
Sta-Tru 24-inch Double Wall Rear Wheel
Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 24-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm
Sta-Tru 26-inch Tubeless Ready DW Front
- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes
Sta-Tru 26 x 1-3/8-inch Steel Rear
- For 37-590 ISO tires only (TIRE2625) - 26x1 3/8 North American size (E.A.3 British Rim/650A French)
Sta-Tru 700c x 25 Speed Tuned Road Front
- Sta-Tru Wheels ST725 silver anodized alloy single wall rims w/ 36holes - Attractive 21mm tall aero profile, and includes a nice 10.5mmbraketrack with wear indicator - Road style KT alloy road hub adds value - 36 UCP spokes
Sta-Tru 700c Double Wall Front Wheel
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 700c Silver Tubeless Ready DW Rear
Sta-Tru Wheels TR21V tubeless-ready double-wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle hub - Silver UCP spokes
Saris Trainer Skewer
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Robert Axle Project Trainer Thru Axle
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Robert Axle Project Kid Trailer Thru Axle
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Prestacycle Presta + Tubeless Valves w/Prestadapter
- Prestacycle's patented "+" profile provides five-way airflow at the base. A flattened tire or tube cannot block flow of either sealant or air. - The valve has a full diameter air passage down the length of the shaft leading to 5-way distribution that expands flow without any reduction. Maximum air flow insures the easiest possible bead seating of a new tire. Maximum sealant flow insures best distribution within the tire. - When installing the valve, you have more choices for tools you can use to keep the base from rotating. Base has a 4mm Hex slot, and the "plus" feature allows you to use a Slotted or Cross-head (Phillips) screwdrivers. - Presta+ Valves are precision machined from a single block of forged 6061-T6 aluminum alloy. This increases the strength of our valves over others while maintaining an extremely light weight. The forged alloy allows our machining to cut highly accurate and smooth threads that make the vale easier to use. - Dual Seals reduce the chance for leaks around the valves. Our Nut includes both a surface sealing rubber base, and a rubber o-ring inside the threads. Maximum leak protection. - Includes (2) Presta+ valves plus a Prestadapter combination Schrader to Presta adapter plus valve core remover! Specifications: - Patented "+" pattern for distributed flow - Forged alloy single piece precision machined body - 50mm length - Semi-soft Presta cap protects presta valve from contaminants without the usual cap failure - Only 5 grams actual weight per valve including threaded nut and plastic cap
Lezyne CNC TLR Valve Pair
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Enduro Max
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
Delta Axlerodz Bolt-On Skewers
- Extra security against theft - 5mm hex CrMo axle
DT Swiss Disc Brake Rotor Adaptor Center Lock/6-Bolt
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
DT Swiss P 1800 Spline 23 Non-disc
At the core of this all-around wheelset lies a modern, wide, and light aluminium rim. Being the foundation of the wheel, it makes for a balanced width-to-stiffness-to-weight ratio. This rim is complemented by a hub featuring DT Swiss' proven pawl system freewheel as well as a high end build with bladed spokes and elaborate alloy nipples. These features make it a premium training wheel easily able to race your mates when the city limit sign comes up.
DT Swiss C 1800 Spline 23
When heavy duty cyclocross riding is your passion, the C 1800 is the right partner for any mission. With its high-end sleeved rim ready to take up MTB-sized rubber and the tough build featuring DT's sturdiest bladed spokes, it is right at home in anything from jumping obstacles to cutting through the mud to sprinting up steeps. Trademark DT Swiss reliability coming from the precision hubs and the superb wheel building quality guarantee trouble free rides year-in and year-out.
DT Swiss PR 1600 Spline 23 Non-disc
Comfort and speed combined. The PR 1600 SPLINE 23 work perfectly with the new breed of wider road tires. These bring about more comfort in the saddle and more grip even when the tarmac turns less and less smooth. The result is a faster, more relaxed ride. Together with the laterally stiff build which uses high end bladed spokes, the PR 1600 SPLINE 23 lets you tackle even the last climb of the day with enough energy to enjoy the looks of the hubs and to plan your next big ride.
Page 1 of 5 Next page