- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

See and Be Seen, Day or Night - Provides visual and audible alerts to warn of vehicles approaching from behind up to 153 yards (140 meters) away - Tail light offers daylight visibility up to a mile away and is visible within a 220-degree range, so drivers can see you well before the radar sees the vehicle - Sleek vertical design easily mounts to most road-use bicycles, including racing, touring and commuter styles - Requires a dedicated radar display unit or wirelessly integrates with compatible Garmin devices (sold separately) - Battery life: up to 15 hours in flashing mode or 6 hours in solid or night flash mode Ride smarter and more aware with Varia RTL510 rearview radar. Mounted neatly on the seatpost, it provides visible and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. Plus, the bright tail light is visible in daylight from up to a mile away, so you can ride with confidence and peace of mind. General Specs: - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, night flash, day flash - Lumens: 20 solid, 29 night flash, 65 day flash - Battery life: 6 hours solid, 6 hours night flash, 15 hours day flash - ANT+: Yes - Water rating: IPX7 - Viewing angle: 220° In The Box: Bundle - Varia RTL510 - Radar display unit - Mounting Kit - Cables - Documentation

If you’re looking for a brilliant combo set that’s powered by replaceable batteries, the Blaze 150 SL & Superflash Turbo set is a great choice. We've teamed up our brightest battery powered headlight and tail light to create the bike light set that is eye catching from 360°. Blaze 150 SL specs: - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 4.8 hrs (high – 150 lm), 11 hrs (low - 80 lm) and up to 62 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams Superflash Turbo specs: - High output surface mounted LED plus 2-5mm LEDs provide steady & Turbo flash modes - Run times: 5 hrs (steady – 20 lm) and up to 100 hrs (Turbo flash - 20 lm) - Provide 180° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and clip mount for multiple mounting options - Mount it to your rear rack with the Rack Bracket (#3108) which is sold separately - 75 grams

The Micro Drive Pro 1000+ Front light is the ultimate companion for cyclists seeking unparalleled performance and reliability. With eight LEDs and a maximum output of 1,000 lumens, this light is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Plus, with an impressive 60-hour max runtime, you can rest assured that this light will last as long as you need it to. Its CNC-machined aluminum and highly waterproof construction with cooling fins guarantee durability. With seven unique output modes, including Daytime Flash, and waterproof USB-C charging(cable not included), the Micro Drive Pro 1000+ offers customizable lighting options for enhanced safety and convenience. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. - Max 1,000 lumens / 60-hour max runtime - Max 1,000 lumens / 60-hour max runtime - Waterproof USB-C charging port with charge indicator - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 2800 mAh battery capacity

Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

FRONT LIGHT: The Mini Drive 400XL is a compact, durable bike light constructed from CNC-machined aluminum. It's equipped with a high-output LED emitter capable of providing up to 400 lumens as well as a Daytime Flash mode. It features eight output modes and cutouts for side visibility as well as an impressive max runtime of 20 hours. Charging is made simple with an integrated, cable-free USB stick, and it securely straps to a variety of handlebar shapes and sizes. REAR LIGHT: The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Front Light Max 400 lumens / 20-hour runtime in Femto mode - Front Light Max 400 lumens / 20-hour runtime in Femto mode - CNC-machined aluminum construction - Daytime Flash mode with Highly Disruptive Pattern - Integrated USB stick for cable-free recharging - GoPro mount available separately - Multiple color options to match your style - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity - Rear Light Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

Vis Adventure's powerfully focused beam and compact size make for a versatile light that can be used for any outdoor sport. It is perfectly designed to run on your helmet, bars, or anywhere you can fit a GoPro mount. Designed to maximize output in a compact design, the Vis Trail features an optimized reflector to make the beam broader and smoother without hotspots. Paired with either a 2, 3, or 6-cell interchangeable external battery, the Vis Trail gives you the flexibility to achieve the runtime you desire for the right price. This light is built for long gravel races, steep snowy slopes, and any adventure you throw at it. Charger not included and must be purchased separately. Key Features - 800 lumen output certified to the FL-1 Standard - Highest rated CREE LED - Custom engineered LED optics create a smooth, even beam pattern - Waterproof design provides all-weather reliability (submersible up to 1 meter) - 50" cord provides plenty of length for any setup requirement - Illuminated power button with low-runtime indicator - Compatible with 2, 3, and 6 cell batteries - Multiple mount options available including GoPro adapter - Additional one-touch 'Race Mode' feature enables riders to conveniently toggle between high and medium output Tech Specs - Lumen Output: High (800), Medium (400), Low (200), Pulse (200) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5'' x 1.2'' x 1.2''

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 10 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Front Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours for front and 11.25 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Engineered for day and night use, the Streak™ 450 headlight and Hotshot SL™ 50 tail light combo set delivers exceptional lighting coverage. The pair fires up an impressive 450 lumens forward and 50 lumens backwards to have you visually covered at night. Not only limited to night, both pack DayLightning® mode to make you stand out in broad daylight with powerful lightning-like flashes, giving you the advantage any time and anywhere you ride. Get the most out of your ride with the performance and features packed into this combo light set. Streak™ 450 USB: - Powerful 450 lumen output with 7 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Walking) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Rugged, water-resistant design only weighs 90 grams - Side illumination ports highlight your presence to nearby motorists - 2nd generation Locktite™ tool-free handlebar mount securely clamps to 22 to 32mm diameter handlebars Hotshot SL™ 50 USB: - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 55 grams - Seat post mount included Patent pending. *Features and specs are subject to change without notice.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

This PDW light set consists of the Pathfinder 200 lumen USB-rechargeable headlight and the Io USB-rechargeable taillight. The Pathfinder 200 has a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - Headlight: 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Headlight: Vertical Cutoff Beam focuses beam into perfect bike path pattern while shielding the LED to prevent blinding oncoming traffic - Taillight: Mounts vertically or horizontally - Taillight: 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)

Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. - Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

FRONT LIGHT: The Fusion Drive Pro 600+ Front is a budget-friendly, feature-packed cycling light designed to elevate your riding experience. It provides powerful and long-lasting illumination with a maximum output of 600 lumens and a runtime of up to 36 hours. This light offers six output modes, including highly disruptive Daytime Flash ensuring maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime. The CNC-machined aluminum construction with cooling fins guarantees durability and efficient heat dissipation, the fresh optical design enhances light dispersion, and the optional GoPro mount allows for versatile mounting options. With waterproof USB-C charging(cable not included), compatibility with the Infinite Light Power Pack+, and rigorous IPX7 waterproofing testing, this light is ready to accompany you on any adventure. REAR LIGHT: The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Front Light Max 600 lumens / 36-hour max runtime - Front Light Max 600 lumens / 36-hour max runtime - Waterproof USB-C charging port with charge indicator - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity - Rear Light Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot