Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples
Upgrade or refresh your bike. - Original equipment replacement Trek Duroc 40 27.5 Boost wheels - 15x110mm front, 148x12mm rear, 6-bolt disc, and SRAM XD freehub - Extra wide alloy rim (40mm outer, 36mm inner width) is perfect for Plus tires - 550g rim is double wall, welded, and disc-specific
Upgrade or refresh your bike. When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Kovee TLR 28H Hole wheels - Convert to tubeless with TLR rim strip and valve, sold separately - Durable alloy symmetric rim with 22.5mm internal 27mm external width - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Bontrager's marquee lightweight carbon road wheel in a 51mm depth, designed for the ultimate in speed, stability, and confidence in all conditions. Be the fastest you The ultralight Aeolus RSL 51 is the perfect upgrade for a faster you. Created with Bontrager's all-new three-dimensional modeling design process, the all-new Aeolus RSL delivers a step-change in speed without sacrificing stability. It's built with the lightest RSL-level OCLV Carbon, shaped into a new 51mm rim profile for the ultimate in speed and versatility across all conditions. Tubeless Ready rims with a wider 23mm inner width are proven to roll with less drag, adding to the overall speed gains, while ultralight hubs with DT Swiss 240s internals and a Ratchet EXP 36-point freehub keep your ride smooth. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - RSL OCLV Carbon is lighter and stronger, allowing for faster, more stable rim profiles - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims compatible with both Bontrager TLR rim strips and TLR tape - 51mm depth OCLV Carbon rim (30mm outer) DT Aerolite spokes 24/24, DT ProLock nipples - Ultralight DT Swiss 240s internals with Ratchet EXP 36-point engagement 11sp freehub, 12s freehubs sold separately - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Replacement axles for DT Swiss hubs.
Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 30 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels feature OCLV Carbon rims with a 29mm inner width and will shave weight and add stiffness to your ride. - OCLV carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool - No rider weight limit
These original replacements will get your wheels working like new. - Alloy thru-axle that can be used with a 6mm hex wrench or with a lever - Keep it light by removing the lever and instead use a 6mm hex wrench - Keep it convenient by keeping the lever inside the axle - Lever is held securely by internal O-ring - Lever sold separately
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Line 30 Centerlock Wheel - Bontrager Line 30 TLR alloy rim - Shimano MT-400 front and MT-510 Micro Spline rear hubs - Centerlock disc brake - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
Comfort and speed combined. The PR 1600 SPLINE 23 work perfectly with the new breed of wider road tires. These bring about more comfort in the saddle and more grip even when the tarmac turns less and less smooth. The result is a faster, more relaxed ride. Together with the laterally stiff build which uses high end bladed spokes, the PR 1600 SPLINE 23 lets you tackle even the last climb of the day with enough energy to enjoy the looks of the hubs and to plan your next big ride.
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Rapid Drive 108 hubs - Pawls and springs sold separately - Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth
Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
Light, smooth, and durable Paradigm is perfect for the cyclist looking for reliable, durable performance at a great value and is packed with many of the features of our higher end wheels. Paradigm features a tubeless ready (TLR) design for easy tubeless conversion and stacked lacing which provides a better bracing angle for a stiffer wheel and more responsive ride feel. Choose Paradigm TLR road wheels for lasting durability and performance that won't break the bank. Product details - Tubeless ready (TLR) rims allow for quick transition to tubeless system upgrade - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 23mm outer, 19.5mm inner width, 3-pawl hub compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions
Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original Equipment replacement Bontrager TLR Disc wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Black spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum
- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black
Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Entry-level hubs
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Page 1 of 2 Next page