Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Brakes/Levers/Pads
- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design.
- Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade
- Quick and easy installation with spline mount and lock ring (included)
- Compatible with metal and resin pads

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like.
- Compatible with mechanical disc brakes and linear-pull brakes.
- Reach Adjust and Speed Dial Leverage Adjust
- Reversible

Original equipment pads for no-compromise disc brake performance.
- Steel backed organic pad is quiet
- Each pad kit includes two pads, a pad spreader spring, guide pin and clip
- For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.

Guide RE is SRAM's optimized braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. The Guide RE provides real, usable on-trail control—optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill.
- Guide R lever assembly with proven Guide technologies
- Powerful 4 piston caliper derived from the Code gravity specific brakes
- Sintered pads for better pad life in intensive use
- MatchMaker X compatible
- Ambidextrous lever mount
- Tool-free reach adjust
- Weight: 415 grams (based on direct mount, 800 hose, 160mm CL Rotor)
- Lever Material: Aluminum
- Caliper Design: 4 piston caliper derived from the Code gravity specific brakes
- Finish: Gloss black
- Pad: Steel-backed metal sintered
- Fluid: DOT 5.1
- Mount: Ambidextrous
- Adjustment: Tool-free Reach Adjust, Banjo Adjust
- Pivot: Bushing

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

Magura type 4. 1 performance pads julie 2008 and prior
- Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation.
- Steel backing plate

Shimano Ultegra R8010 direct-mount type brake caliper.
- Direct mount brake
- Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance
- Sleek design
- Narrower gap between arms
- Wider clearance with larger tire sizes
- Compatible with wider 28c tire size
- Model Number: BR-R8010-F
- Series: Ultegra
- Brake Type: Direct mount type
- Average Weight: 174 grams

• High performance compound recommended for all•conditions
• Alloy backing plate: 50% lighter than steel backing plate

• 107mm arch for better clearance with mud guard
• Updated rubber boots secure attachment to lead pipe
• Strong braking power with excellent braking control
• Cartridge shoe holder
• Color options: Black, Silver
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power.
- Qty 1 = enough for 1 wheel

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation.
- Four aluminum pistons provide the stopping power and excellent heat management
- Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature
- Forged aluminum lever body and blade
- Bleeding Edge design for easier maintenance
- Includes steel-backed sintered metal pads

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction.
- 10% stiffer than previous generation M7000 even under high-temp conditions
- Quicker brake engagement with shorter free stroke
- Tool-free lever reach adjustment
- I-SPEC EV Clamp Band enables optional integrated shifter setup

- Pair of H-type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than D-type pads
- Includes spring and split pin

Replacement inserts for Shimano cartridge v-brake pads
- Black: standard compound designed for dry condition riding
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Green: designed for ceramic coated rims
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

BL-M6100
- Intuitive and powerful braking
- Quicker brake engagement with shorter free stroke
- Rider tunable and action-optimized cockpit
- High-performance brake control
- Additional contact point for a stiffer brake lever
- 10 deg. rotation angle setting range for I-SPEC EV shifting lever
BR-M6100
- Pre-assembled
- One-way bleeding system
- Superior modulation gives you the power you need at low weight
- Quick piston retraction
- Lightweight 2-piston disc brake caliper
- ICE TECHNOLOGIES
- Without rotor and adapter

6-Bolt disc brake rotor
- Easy to install anti-loosen plates help secure disc brake rotor bolts in place
- Resin/Metal pad compatible
- Size: 160, 180, 203, 220mm
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow.
Features:
- Hardened and Plated reinforced steel backbone
- Patented Angled tip plow
- Water grooves
- Pad-Lock washer system
- Available in Threaded and 2024 Aluminum Smooth Post
Black: standard compound designed for dry condition riding
Red: semi-aggressive compound for good performance
Salmon: aggressive compound for extreme weather conditions
Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
Page 1 of 5
Next page