Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Problem Solvers Handlebar Clamp Shim
$7.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
KMC MissingLink Connector
$0.89 - $17.99
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Problem Solvers Clamp-On Water Bottle Cage Mount
$5.99 - $8.99
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
Problem Solvers Locking Headset Spacer
$10.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
SRAM PowerLock Link Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Problem Solvers Deckster Clipless Pedal Adapter
$35.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. • Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay • Cleats not included • 85 x 95 x 10mm platform • Hardware included, cleats not included
Odyssey HalfBash Sprocket w/Guard
$49.99
The HalfBash sprocket features a lightweight plastic (replaceable) bash guard to protect your setup. You can run 1 guard, 2 guards* or no guards at all. Features: - 7075-T6 Aluminum Sprocket - Replaceable Plastic Bash Guard - 25t & 28t *bolts for 2nd guard set up sold separately
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Salsa Alternator 1.0 Left Plate
$30.00 - $50.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Alternator 2.0 Left Dropout Plate
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
Campagnolo Disk Brake Mineral Oil
$27.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Problem Solvers I-Spec II Shifter Clamp
$37.50
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
Problem Solvers 1-1/8-inch Headset Spacers
$3.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers 1-inch Headset Spacers
$5.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
FSA Aluminum Headset Stack Spacers
$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
Thomson Stem Cap
$9.95
- Machined aluminum with three Thomson logos circling the cap
Wheels Manufacturing Inc. Derailleur Hanger 156
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws Note: Not compatible with 2012 Cervelo models
Profile Design Race/Ergo Pad Set
$25.99
The Race and Ergo pads are available in two thicknesses, 5mm and 10mm, allowing riders to tune the diameter for a snug fit. The Race is compatible with all current aerobars and earlier models that used the F19, F22 or F35 armrests. - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover
Profile Design 4525a Aluminum Extensions
$47.99
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 4525a is a 45° / 25° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the rider's hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - The 4525a extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position. - The 4525a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent Trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25a as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So it can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 101
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screw
FSA ISIS M12 Crank Bolts
$4.99
ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA. - ISIS-compatible - M12
Wolf Tooth Components Set of 5 Chainring Bolts+Nuts For 1x
$24.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams
Wolf Tooth Components ReMote Dropper Post Lever
$64.95 - $69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
SRAM X-Sync Pulley Assembly
$44.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
SRAM Flat Mount Disc Brake Adaptor
$18.00 - $23.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
RockShox Maxle Stealth Rear Thru-Axle
$31.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
Page 1 of 25 Next page