Filter By:
- Parts & Accessories (16)
- Wheels (28)
- Hubs (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
Wheels Mfg. axles are made from aircraft quality 4130 alloy steel, made specifically for them. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many tandem hubs - Hollow Axle - Type: Quick release - Sold individually
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims.
- Teravail Tubeless Tape comes in a variety of widths to fit almost any rim.
- Teravail Tubeless Tape is available in a variety of widths and roll lengths.
- Ten-meter length is enough for a single layer on approximately four wheels
- STW ST1 26.5mm wide alloy rims
- Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks
- Alloy wheels use 14G UCP spokes with 5/8" brass nipples
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)
- Replacement rear wheel skewer.
- Specifically designed for use with Saris trainers.
- Can be used for both indoor and outdoor rides.
- Prestacycle's patented "+" profile provides five-way airflow at the base. A flattened tire or tube cannot block flow of either sealant or air.
- The valve has a full diameter air passage down the length of the shaft leading to 5-way distribution that expands flow without any reduction. Maximum air flow insures the easiest possible bead seating of a new tire. Maximum sealant flow insures best distribution within the tire.
- When installing the valve, you have more choices for tools you can use to keep the base from rotating. Base has a 4mm Hex slot, and the "plus" feature allows you to use a Slotted or Cross-head (Phillips) screwdrivers.
- Presta+ Valves are precision machined from a single block of forged 6061-T6 aluminum alloy. This increases the strength of our valves over others while maintaining an extremely light weight. The forged alloy allows our machining to cut highly accurate and smooth threads that make the vale easier to use.
- Dual Seals reduce the chance for leaks around the valves. Our Nut includes both a surface sealing rubber base, and a rubber o-ring inside the threads. Maximum leak protection.
- Includes (2) Presta+ valves plus a Prestadapter combination Schrader to Presta adapter plus valve core remover!
Specifications:
- Patented "+" pattern for distributed flow
- Forged alloy single piece precision machined body
- 50mm length
- Semi-soft Presta cap protects presta valve from contaminants without the usual cap failure
- Only 5 grams actual weight per valve including threaded nut and plastic cap
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Included
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub with Ratchet EXP completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub with Ratchet EXP driver
- Competition race spokes and Squorx nipples
A carbon road wheel with a 37mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability.
Fast and lightweight
The versatile Aeolus Pro 37 is the perfect wheel for climbs, crits, cross, and more. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles—and the silky smooth hubs rolling on DT Swiss 350 internals deliver a quick-rolling ride wherever you roam.
All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy.
Product details
- OCLV Pro carbon offers an optimized blend of weight, strength, and durability
- All-new 37mm depth brings the benefits of aerodynamics to lightweight design
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- 37mm depth OCLV Carbon rim (28mm outer, 21mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples
- Center lock disc hubs with 12mm thru-axle front and rear, DT Swiss 350 hubs with 18 point engagement
- Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately
- Includes TLR rim strip, TLR valve, and traditional rim strip
- Warrantied for life, no rider weight limit
For the groad less traveled
Aeolus Pro 3V is the ultimate road disc upgrade. It has a wider 25mm internal rim so you can run lower pressure for better tire support, added traction, better cornering, and a faster, more comfortable ride. Plus, Rapid Drive 108 road hubs add snappy engagement for an all-around better ride.
Product details
- OCLV Pro Carbon offers an optimized blend of weight, strength, and durability
- D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge
- 25mm inner rim width (32mm outer) for added tire support to suit larger-volume road and gravel tires
- Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- Center Lock disc with 12mm thru-axle and end caps available for 15mm conversion
- Carbon Care Wheel Loyalty Program offers no-cost replacement or repair of rim for first two years of ownership
- No rider weight limit
For the groad less traveled
Aeolus Pro 3V is the ultimate road disc upgrade. It has a wider 25mm internal rim so you can run lower pressure for better tire support, added traction, better cornering, and a faster, more comfortable ride. Plus, Rapid Drive 108 road hubs add snappy engagement for an all-around better ride.
Product details
- OCLV Pro Carbon offers an optimized blend of weight, strength, and durability
- D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge
- 25mm inner rim width (32mm outer) for added tire support to suit larger-volume road and gravel tires
- Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- Center Lock disc with 12mm thru-axle and end caps available for 15mm conversion
- Carbon Care Wheel Loyalty Program offers no-cost replacement or repair of rim for first two years of ownership
- No rider weight limit
Upgrade or refresh your bike.
GENUINE REPLACEMENT PARTS
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement Bontrager Affinity TLR Disc 24H wheels
- Centerlock hubs in 100x12m and 142x12mm sizes
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheel shipped as photographed
Upgrade or refresh your DT Swiss-based Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub bodies for DT Swiss Ratchet System hub platform
- Compatible with all Bontrager MTB wheels with DT 240 hub internals
- Available with either 5mm quick release or 12mm Thru Axle end cap
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with select Aeolus Pro, Aura, Race Lite, and Paradigm Comp wheels
- End cap sold separately
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager Rapid Drive 108 hubs
- Pawls and springs sold separately
- Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Upgrade or refresh your bike.
- Original equipment replacement Bontrager Connection Disc wheels
- Durable double-wall rim with 20mm internal, 26mm external width
- Black rim graphics and spoke nipples
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
Upgrade or refresh your bike.
GENUINE REPLACEMENT PARTS
When it's time to refresh your trusty bike, Trek genuine replacement parts have you covered.
PRODUCT DETAILS
- Original equipment replacement Bontrager Kovee TLR 28H Hole wheels
- Convert to tubeless with TLR rim strip and valve, sold separately
- Durable alloy symmetric rim with 25mm internal 30mm e/ternal width
- Does not include skewer, reflector, rim strip, valve, or owner's manual
Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 30 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels feature OCLV Carbon rims with a 29mm inner width and will shave weight and add stiffness to your ride.
- OCLV carbon offers an optimized blend of weight, strength, and durability
- Rapid Drive 54 hub instantly transfers effort into forward momentum
- Tubeless-ready (TLR) rims allow for quick upgrades to tubeless
- Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width
- 28 front/rear 14G spokes with Alpina alloy locking nipples
- 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately
- Includes TLR rim strip installed, TLR valve, valve core removal tool
- No rider weight limit
Get back on the bike with a genuine replacement wheel.
When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered.
PRODUCT DETAILS
- Original equipment replacement Bontrager Kovee TLR 32H Hole wheel
- Convert to tubeless with TLR rim strip and valve, sold separately
- Durable alloy symmetric rim with 22.5mm internal 27mm external width
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
Get back on the bike with a genuine replacement wheel.
When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered.
PRODUCT DETAILS
- Original equipment replacement Line 30 Centerlock Wheel
- Bontrager Line 30 TLR alloy rim
- Shimano MT-400 front and MT-510 Micro Spline rear hubs
- Centerlock disc brake
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
A durable road wheel with a 25mm inner width perfect for higher-volume road and gravel tires.
A wider rim for a better ride
The Paradigm Comp 25 road wheel adds traction, speed, confidence, and comfort to your ride, with a wider internal rim width that lets you run lower pressure for better tire support.
Product details
- 25mm inner rim width (30mm outer) offers added tire support to better suit larger-volume road and gravel tires
- Rapid Drive 54 road hubs provide quick engagement for faster acceleration and increased control
- Offset spoke bed reduces wheel dish for stiff and stable performance
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- 23mm rim depth with 24 hole front/rear and DT Aerolite spokes
- Centerlock disc with 12mm thru-axle and end caps available for 15mm conversion
- Includes TLR rim strip and TLR valve for simple tubeless setup
- No rider weight limit
Light, smooth, and durable
Paradigm is perfect for the cyclist looking for reliable, durable performance at a great value and is packed with many of the features of our higher end wheels. Paradigm features a tubeless ready (TLR) design for easy tubeless conversion and stacked lacing which provides a better bracing angle for a stiffer wheel and more responsive ride feel. Choose Paradigm TLR road wheels for lasting durability and performance that won't break the bank.
Product details
- Tubeless ready (TLR) rims allow for quick transition to tubeless system upgrade
- Offset spoke bed reduces wheel dish for stiff and stable performance
- 6061 alloy rim 23mm outer, 19.5mm inner width, 3-pawl hub compatible with Shimano 10/11 speed, SRAM 10/11 freehubs
- Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release
- No rider weight restrictions
These original replacements will get your wheels working like new.
- Alloy thru-axle that can be used with a 6mm hex wrench or with a lever
- Keep it light by removing the lever and instead use a 6mm hex wrench
- Keep it convenient by keeping the lever inside the axle
- Lever is held securely by internal O-ring
- Lever sold separately
Bontrager Tubeless (TLR) Rim Tape creates an air-tight seal that covers spoke holes in the rim for easy tubeless tire setup and installation. The tape securely bonds to the rim and doesn't leave residue when removed. For use with wheels approved for TLR Tape-based tubeless conversion.
- Provides durable, air-tight seal over spoke holes for tubeless conversion
- Wrap four wheels with a single layer of tape or two wheels with a double layer
- Provides secure adhesion to rim without leaving residue when removed
- Thoroughly clean and dry rim bed before applying
- For use with rims approved for TLR Tape-based tubeless conversion
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer.
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Page 1 of 2
Next page